Many nail technicians, knowing about the high quality of SUNUV lamps, give their preference in their work to them. And such trust is more than justified, because the original SUNUV lamps are always guaranteed high quality not only the lamp itself, but also the polymerization. Regardless of the type of nail coating you can choose the most suitable mode of operation, taking into account the time and even the power of polymerization. And this already gives more possibilities for customizing the lamp.
SUNUV SUN 3 lamp is recently the most popular model among all models of the manufacturer. First of all, it is paid attention to because of a fairly large number of LEDs compared to other models. In the lamp they are built in 39 pieces at once, and in such a way that there are no blind spots. Thanks to this, you can be sure that the gel-lacquer in any case will dry on each of the nails. And if the gel-lacquer is poorly dried, then a few days after the procedure manicure can be spoiled! This will be both unpleasant and frustrating, and in general a waste of money, time, materials and effort. That is why the SUN 3 in this regard has a much more advantageous position not only before the lamps of other manufacturers, but even before the lamps of the same manufacturer SUNUV.
Also, it is worth noting one small, but quite a significant feature of this model - is the presence of three LEDs, which are slightly separate from all the others. They are located closest to the nails, and therefore shine a directed light on the nails, rather than scattering on the entire surface of the hand.
Good drying of absolutely any nail material is also guaranteed by the fact that the lamp has built-in hybrid LEDs: UV (ultraviolet light) and LED (light-emitting diode). This increases the range of the UV spectrum, which also increases the variety of gels the technician can work with.
The lamp has a built-in hand movement sensor, so as soon as the client places his hand under the LEDs, the polymerization process is automatically activated. If no time mode was not selected, the lamp will conditionally turn on with a timer of 120 seconds. But if the mode was still selected (10; 30; 60; 99), then the polymerization will last according to the time depending on the selected mode.
Before the client arrives, you can set the polymerization time in advance (in other words, set the timer), if of course you know what nail material you will be working with. This function is called memorization mode, and it can be activated for 10, 30 and 60 seconds. To activate this function, you need to press the button of the selected mode and hold it for 2-3 seconds. Thus, every time the customer places his hand under the LEDs, the same timer mode as before will be activated. This function can be deactivated by double pressing any button.
The timer mode for 99 seconds is most suitable for those masters who work with "heavy" nail coatings. This mode is also called gentle, and it is good because the power of UV/LED LEDs is reduced by 2 times, that is, instead of 48 watts of power is 24 watts. Taking into account that polymerization lasts 99 seconds at the power of LEDs in 24 watts, we can conclude that the polymerization of the nail coating will be slow, without causing painful burning. And this is sure to be appreciated by customers with thin, sensitive nail plate!
To the features of the design, in turn, can be attributed the ability to remove the bottom. With a little effort, it can be pulled out of the grooves for greater convenience when cleaning the lamp or during a pedicure.
Regardless of the fact that visually there is no display on the lamp, it is still equipped with a timer. The timer display is located under the body, so the time will only be displayed once the lamp is turned on.
The lamp is also equipped with the Smart 2.0 automatic overheating protection system. Thanks to it, the lamp switches off if the LEDs get very hot. Taking into account this protection system and the long life of UV/LED LEDs (50000 hours of continuous operation), we can conclude that the lamp will last a long time, with high quality and without malfunctions.
SUNUV SUN 3 lamp is recently the most popular model among all models of the manufacturer. First of all, it is paid attention to because of a fairly large number of LEDs compared to other models. In the lamp they are built in 39 pieces at once, and in such a way that there are no blind spots. Thanks to this, you can be sure that the gel-lacquer in any case will dry on each of the nails. And if the gel-lacquer is poorly dried, then a few days after the procedure manicure can be spoiled! This will be both unpleasant and frustrating, and in general a waste of money, time, materials and effort. That is why the SUN 3 in this regard has a much more advantageous position not only before the lamps of other manufacturers, but even before the lamps of the same manufacturer SUNUV.
Also, it is worth noting one small, but quite a significant feature of this model - is the presence of three LEDs, which are slightly separate from all the others. They are located closest to the nails, and therefore shine a directed light on the nails, rather than scattering on the entire surface of the hand.
Good drying of absolutely any nail material is also guaranteed by the fact that the lamp has built-in hybrid LEDs: UV (ultraviolet light) and LED (light-emitting diode). This increases the range of the UV spectrum, which also increases the variety of gels the technician can work with.
The lamp has a built-in hand movement sensor, so as soon as the client places his hand under the LEDs, the polymerization process is automatically activated. If no time mode was not selected, the lamp will conditionally turn on with a timer of 120 seconds. But if the mode was still selected (10; 30; 60; 99), then the polymerization will last according to the time depending on the selected mode.
Before the client arrives, you can set the polymerization time in advance (in other words, set the timer), if of course you know what nail material you will be working with. This function is called memorization mode, and it can be activated for 10, 30 and 60 seconds. To activate this function, you need to press the button of the selected mode and hold it for 2-3 seconds. Thus, every time the customer places his hand under the LEDs, the same timer mode as before will be activated. This function can be deactivated by double pressing any button.
The timer mode for 99 seconds is most suitable for those masters who work with "heavy" nail coatings. This mode is also called gentle, and it is good because the power of UV/LED LEDs is reduced by 2 times, that is, instead of 48 watts of power is 24 watts. Taking into account that polymerization lasts 99 seconds at the power of LEDs in 24 watts, we can conclude that the polymerization of the nail coating will be slow, without causing painful burning. And this is sure to be appreciated by customers with thin, sensitive nail plate!
To the features of the design, in turn, can be attributed the ability to remove the bottom. With a little effort, it can be pulled out of the grooves for greater convenience when cleaning the lamp or during a pedicure.
Regardless of the fact that visually there is no display on the lamp, it is still equipped with a timer. The timer display is located under the body, so the time will only be displayed once the lamp is turned on.
The lamp is also equipped with the Smart 2.0 automatic overheating protection system. Thanks to it, the lamp switches off if the LEDs get very hot. Taking into account this protection system and the long life of UV/LED LEDs (50000 hours of continuous operation), we can conclude that the lamp will last a long time, with high quality and without malfunctions.
There are no reviews for this product.
Give feedback
