Attention! This pedicure machine only works with 230 V.
At a certain stage of development, many podiatrists need to purchase a more reliable and professional apparatus for performing pedicure procedures. And a good answer to this request, with an optimal price/quality ratio, is the Saeshin Medi Pro pedicure machine with built-in hoover, designed for professional use by podiatrists.
The Medi Pro device is manufactured in South Korea by Saeshin - one of the world's leading manufacturers of dental and manicure-pedicure micro-motor handpieces, known and famous all over the world under the brand name Strong, and a little less known - Brillian and Traus. Top quality, attention to detail and nuance, and modern design are Saeshin's hallmarks.
Saeshin Medi Pro is the "big brother" of the world-famous pedicure device Saeshin Medi Power. And, although these two models are almost identical in appearance, the "stuffing" of Saeshin Medi Pro is slightly different.
First of all, the updates affected the handpiece. This time Saeshin engineers have installed a brushless motor, and this type of motor has a number of advantages compared to brush analogues. The whole point is that "collectorless motors" are structurally different from brush motors mainly due to the fact that the collector is removed from the design, and this is a rather heavy, complex and sparking unit.
That is, there is no collector - no friction and heating, and the maximum sound produced by it is the "rustling" of torsion at high speeds of bearings, which, by the way, are designed specifically for collectorless motors and have a completely different, also many times higher degree of wear.
The maximum speed of Saeshin Medi Pro is 40000 rpm, which is 10000 rpm more than Saeshin Medi Power, and the torque is increased by 2 N*cm. It would seem that the increase in handpiece power should make the handpiece heavier, but no, the new pen is 10g lighter - precisely due to the introduction of a colectorless motor.
The changes have not affected the handpeice dimensions, here, as well as with Medi Power, the length is 146 mm and the diameter is 27 mm. The body is still made of special medical plastic, which does not slip and does not "stick" to the hands of the master. It is also convenient that there is an on/off button on the handpiece itself.
The handpiece has a function of automatic fixation of the nozzle, that is, to change the nail drill bit, you just need to install it in the collet, without any additional actions. To remove the nail drill bit, the same steps are required, but in reverse order.
Another advantage of the Medi Pro is the "feedback" function, which adds torque when resistance is encountered, for example when treating hard corns or calluses. The microprocessor, given the increased resistance, will add current to the handpiece in a split second, adding speed and torque.
The Saeshin Medi Pro has a built-in low-noise brushless (compared to competitors) 400W hoover that easily sucks up all the dust from nail and foot treatments. The dust is collected in a special antibacterial bag that can be easily detached. The device has an advanced system of changing the dust bag, where you do not need to disconnect the wires or carry out complex manipulations - the whole procedure of changing the bag takes a few seconds. Simply pull it out of the unit by grasping the special thickening where the corrugated hose enters the unit.
At the front of the body there is a convenient control panel with displays of tip speed and hoover power. Between them there are buttons for adjustment and switching with intuitive interface: on/off handpiece, on/off hoover, switching to reverse, switching control "hand/pedal", and "A/M" - automatic intelligent mode, in which the device itself adjusts the suction power of the hoover depending on the speed of rotation of the nail drill bit (higher speed - stronger suction). On the top of the case there is a handpiece for carrying the appliance, as well as a convenient supply under the handpiece on the right side.
A 1.3 metre long corrugated hose will allow you to place the control unit at a convenient distance from the pedicure chair or couch. It is also worth mentioning that although the corrugated hose looks rather stiff on the photo, it is not really so: it is made of special rubber with silicone, so it is very soft and flexible to the touch, it does not pull your hand at all. And this is despite the fact that it will be very difficult to damage it.
But, of course, this is far from its main advantages. The main distinguishing feature of this device compared to its closest competitors of German production is the price, which is lower by about one and a half times.
All these are the distinctive features and traditionally the highest quality of production and reliability of Saeshin.
The Medi Pro device is manufactured in South Korea by Saeshin - one of the world's leading manufacturers of dental and manicure-pedicure micro-motor handpieces, known and famous all over the world under the brand name Strong, and a little less known - Brillian and Traus. Top quality, attention to detail and nuance, and modern design are Saeshin's hallmarks.
Saeshin Medi Pro is the "big brother" of the world-famous pedicure device Saeshin Medi Power. And, although these two models are almost identical in appearance, the "stuffing" of Saeshin Medi Pro is slightly different.
First of all, the updates affected the handpiece. This time Saeshin engineers have installed a brushless motor, and this type of motor has a number of advantages compared to brush analogues. The whole point is that "collectorless motors" are structurally different from brush motors mainly due to the fact that the collector is removed from the design, and this is a rather heavy, complex and sparking unit.
That is, there is no collector - no friction and heating, and the maximum sound produced by it is the "rustling" of torsion at high speeds of bearings, which, by the way, are designed specifically for collectorless motors and have a completely different, also many times higher degree of wear.
The maximum speed of Saeshin Medi Pro is 40000 rpm, which is 10000 rpm more than Saeshin Medi Power, and the torque is increased by 2 N*cm. It would seem that the increase in handpiece power should make the handpiece heavier, but no, the new pen is 10g lighter - precisely due to the introduction of a colectorless motor.
The changes have not affected the handpeice dimensions, here, as well as with Medi Power, the length is 146 mm and the diameter is 27 mm. The body is still made of special medical plastic, which does not slip and does not "stick" to the hands of the master. It is also convenient that there is an on/off button on the handpiece itself.
The handpiece has a function of automatic fixation of the nozzle, that is, to change the nail drill bit, you just need to install it in the collet, without any additional actions. To remove the nail drill bit, the same steps are required, but in reverse order.
Another advantage of the Medi Pro is the "feedback" function, which adds torque when resistance is encountered, for example when treating hard corns or calluses. The microprocessor, given the increased resistance, will add current to the handpiece in a split second, adding speed and torque.
The Saeshin Medi Pro has a built-in low-noise brushless (compared to competitors) 400W hoover that easily sucks up all the dust from nail and foot treatments. The dust is collected in a special antibacterial bag that can be easily detached. The device has an advanced system of changing the dust bag, where you do not need to disconnect the wires or carry out complex manipulations - the whole procedure of changing the bag takes a few seconds. Simply pull it out of the unit by grasping the special thickening where the corrugated hose enters the unit.
At the front of the body there is a convenient control panel with displays of tip speed and hoover power. Between them there are buttons for adjustment and switching with intuitive interface: on/off handpiece, on/off hoover, switching to reverse, switching control "hand/pedal", and "A/M" - automatic intelligent mode, in which the device itself adjusts the suction power of the hoover depending on the speed of rotation of the nail drill bit (higher speed - stronger suction). On the top of the case there is a handpiece for carrying the appliance, as well as a convenient supply under the handpiece on the right side.
A 1.3 metre long corrugated hose will allow you to place the control unit at a convenient distance from the pedicure chair or couch. It is also worth mentioning that although the corrugated hose looks rather stiff on the photo, it is not really so: it is made of special rubber with silicone, so it is very soft and flexible to the touch, it does not pull your hand at all. And this is despite the fact that it will be very difficult to damage it.
But, of course, this is far from its main advantages. The main distinguishing feature of this device compared to its closest competitors of German production is the price, which is lower by about one and a half times.
All these are the distinctive features and traditionally the highest quality of production and reliability of Saeshin.
There are no reviews for this product.
Give feedback
