Attention! This nail drill only works with 230 V.
The Strong 211 (B135)/H400 nail drill is a new model in the world-famous Strong range of professional nail drills. Having received a completely new handpiece and an updated control unit, this nail drill is in fact an evolutionary development of the legendary 210 series. Saeshin engineers took the development of this set very seriously, having studied in detail all the small drawbacks of the long-loved Strong 210, they managed to create a modernised version of the control unit and a handpiece with a completely different, revolutionary mechanism for clamping the nail drill bit "2S System".
The Strong B135/H400 control unit, like its "big brother" - the 210, has on board automatic overload protection systems for the transformer, as well as a separate fuse for additional protection of the internal components of the unit.
The main difference between B135 and 210 is the original, ergonomic design, which complements well the interior of the workplace of a professional manicurist or pedicurist. White, matte colour with neutral dark inserts on the control panel, looks great both in beauty salons and at home - for amateur masters who use the tool to work at home.
The main interest is the handpiece of the H400, because it is not without reason they say that the handpiece is an extension of the master's hand. Accordingly, it should provide maximum comfort in work. The new generation of Strong handpieces is designed to meet the increased requirements of nail technicians.
The design of the H400 handpiece is similar to that of brushless micromotors. These micromotors are characterised by their reliability, high torque and balanced collet assembly. With a relatively low handpiece weight, approximately +10% compared to the Strong 105l, a significant increase in torque is achieved - here it is 4 N*cm.
The micromotor has a new nail drill bit clamping system. Now, the collet clamp works on a slightly different principle: to fully lock the nozzle in place, the upper part of the micromotor must be turned twice (two clicks instead of one).
The handpeice is fitted with four wear-resistant precision bearings, which not only achieve a speed of 40000 rpm, but also very low levels of heat and noise generation - "Zero Vibration Technology".
The increased thickness of the plastic on the case walls adds more strength, which better secures the unit from accidental mechanical impact. Although the unit is more stable, its weight and dimensions are not significantly affected. If we compare it with the 210th block, the difference in weight is only 30 grams, and the dimensions of both blocks are almost identical.
In terms of functional features, the B135 block is similar to the 210 block. On the sides of the case there are the same toggle switches: "ON/OFF", "HAND/FOOT", reverse, connectors for power, micromotor and pedal. The ability to disconnect the power cord when transporting the unit, which is not present in Strong 210, is very pleasing. Like all Strong power supplies, it also has a standard DC 0-32 V output voltage and a maximum load current of 2A, with a power of 125W. When using the pedal, it is important to know that you are controlling the power to the micromotor, you can only adjust the RPM with your hand on the unit.
Strong 211 (B135)/H400 - ideal for intensive manicure procedures during the whole working day, as the handpiece does not tire the master's hand. The improved tip with higher torque makes it easy to perform pedicure procedures.
The Strong B135/H400 control unit, like its "big brother" - the 210, has on board automatic overload protection systems for the transformer, as well as a separate fuse for additional protection of the internal components of the unit.
The main difference between B135 and 210 is the original, ergonomic design, which complements well the interior of the workplace of a professional manicurist or pedicurist. White, matte colour with neutral dark inserts on the control panel, looks great both in beauty salons and at home - for amateur masters who use the tool to work at home.
The main interest is the handpiece of the H400, because it is not without reason they say that the handpiece is an extension of the master's hand. Accordingly, it should provide maximum comfort in work. The new generation of Strong handpieces is designed to meet the increased requirements of nail technicians.
The design of the H400 handpiece is similar to that of brushless micromotors. These micromotors are characterised by their reliability, high torque and balanced collet assembly. With a relatively low handpiece weight, approximately +10% compared to the Strong 105l, a significant increase in torque is achieved - here it is 4 N*cm.
The micromotor has a new nail drill bit clamping system. Now, the collet clamp works on a slightly different principle: to fully lock the nozzle in place, the upper part of the micromotor must be turned twice (two clicks instead of one).
The handpeice is fitted with four wear-resistant precision bearings, which not only achieve a speed of 40000 rpm, but also very low levels of heat and noise generation - "Zero Vibration Technology".
The increased thickness of the plastic on the case walls adds more strength, which better secures the unit from accidental mechanical impact. Although the unit is more stable, its weight and dimensions are not significantly affected. If we compare it with the 210th block, the difference in weight is only 30 grams, and the dimensions of both blocks are almost identical.
In terms of functional features, the B135 block is similar to the 210 block. On the sides of the case there are the same toggle switches: "ON/OFF", "HAND/FOOT", reverse, connectors for power, micromotor and pedal. The ability to disconnect the power cord when transporting the unit, which is not present in Strong 210, is very pleasing. Like all Strong power supplies, it also has a standard DC 0-32 V output voltage and a maximum load current of 2A, with a power of 125W. When using the pedal, it is important to know that you are controlling the power to the micromotor, you can only adjust the RPM with your hand on the unit.
Strong 211 (B135)/H400 - ideal for intensive manicure procedures during the whole working day, as the handpiece does not tire the master's hand. The improved tip with higher torque makes it easy to perform pedicure procedures.
There are no reviews for this product.
Give feedback
